1800W 110V Spot Welder Dent Puller Kit 6 Modes for Automotive Repair

Description

Key Features

✔️	2 Functions – Automatic welding mode for consistent, accurate results every time a repair is made; Manual Weld Mode allows you to set the weld mode and power.
✔️	6 Welding modes – Triangular meson pull, Round meson pull, OT meson pull, Wave line welding, Carbon rod to close the fire, Single-sided spot welding; suitable for pointed shapes, deep dents, curves, or flat areas.
✔️	Overheating protection system – Equipped with a heat dissipation system; overheat protection activates at 203°F/95°C to avoid potential short circuits and machine burnout.
✔️	Upgraded transformer & Thick copper wire – Low no-load current, low failure rate, high power factor; soft texture welding wire, energy saving and power saving.
✔️	Professional stud welder dent repair – Advanced microcomputer program control enhances welding range and precision, ensuring accurate and stable welding results.
✔️	Packing list – Portable toolbox with all accessories: 1x Main Unit, 1x Weld Puller, 1x Dent Puller, 1x Manual Suction cup, 1x Dual Purpose Dielectric Head, 1x six Jaw Hook, 1x Spanner Wrench, 1x Circular Washer Chuck, 1x Tie Hook, 1x Connector, 1x Carbon Rod Connector, 2x Carbon Rods, 10x Triangle Straight Puller Tabs, 10x Wave Wire, 20x Circular Washers, 20x OT Spacers, 1x user manual.

How to Use

• Connect the welder to a power source.
• Select the desired welding mode.
• Position the welding tip on the dent.
• Press the trigger to initiate welding.
• Allow the weld to cool before removing the puller.

More Info

Price: [price_with_discount]
(as of [price_update_date] – Details)

Product Standout Benefits

2 Functions

Automatic welding mode for consistent, accurate results every time a repair is made enables consistent, accurate results every time a repair is made.

Manual Weld Mode allows you to set the weld mode and power.

6 Welding Modes

Triangular meson pull, Round meson pull, OT meson pull, Wave line welding, Carbon rod to close the fire, Single-sided spot welding.

Whether you’re addressing pointed shapes, deep dents, curves, or flat areas, this dent repair kit has you covered.

Overheating Protection System

The dent puller spot welder is equipped with a heat dissipation system on the side, and the overheat protection system will activate at 203°F/95°C to avoid potential short circuits and machine burnout.

Upgraded Transformer & Thick Copper Wire

The current range of the sheet metal repair machine transformer determines the size and tension of the weld joint of the sheet metal repair machine, which affects the quality of the repair and the efficiency of the work.

Our dent puller welder have low no-load current, low failure rate and high power factor.

Adopt Thick copper wire welding wire, soft texture, not easy to break, energy saving and power saving.

Professional Stud Welder Dent Repair

It adopts advanced microcomputer program control to enhance welding range and precision, ensuring accurate and stable welding results.

Even if your vehicle has thick cal18 film, our spot welder dent puller has enough strength to adhere to the sheet and without effort it takes blows, on canvas and footboards.

Packing List

We offer a portable toolbox with all the accessories of the device, accessories included:

• 1x Main Unit
• 1x Weld Puller
• 1x Dent Puller
• 1x Manual Suction Cup
• 1x Dual Purpose Dielectric Head
• 1x Six Jaw Hook
• 1x Spanner Wrench
• 1x Circular Washer Chuck
• 1x Tie Hook
• 1x Connector
• 1x Carbon Rod Connector
• 2x Carbon Rods
• 10 x Triangle Straight Puller Tabs
• 10 x Wave Wire
• 20 x Circular Washers
• 20 x OT Spacers
• 1x user manual

Customer Questions and Answers

Q: What makes this dent repair kit so versatile? 🤔
A: It’s got 6 different welding modes like triangular meson pull, round meson pull, OT meson pull, wave line welding, carbon rod to close the fire, and single-sided spot welding. So, whether you’re dealing with pointed shapes, deep dents, curves, or flat spots, this kit has got you covered! ✨

Q: What’s the deal with the overheating protection? 💡
A: Great question! The dent puller spot welder has a built-in heat dissipation system and an overheat protection system that kicks in at 203°F/95°C. This is super important to prevent potential short circuits and keep the machine from burning out. 🔥

Q: How does the upgraded transformer and thick copper wire help? 🌟
A: Glad you asked! The transformer’s current range really affects the weld joint’s size and tension, which directly impacts the repair quality and how efficiently you work. Ours has a low no-load current, a low failure rate, and a high power factor. Plus, the thick copper wire is soft, not easy to break, and saves energy! 💪

Q: Is this machine strong enough for thicker materials? 🛠️
A: Absolutely! It uses advanced microcomputer program control for better welding range and precision. It’s strong enough to stick to even thick sheet metal, like cal18 film, and can handle blows on canvas and footboards without any issues. 💯

Q: What all comes in the box? 🎁
A: You get a handy portable toolbox with everything you need! Inside, you’ll find the main unit, a weld puller, a dent puller, a manual suction cup, a dual-purpose dielectric head, a six jaw hook, a spanner wrench, a circular washer chuck, a tie hook, a connector, a carbon rod connector, two carbon rods, 10 triangle straight puller tabs, 10 wave wires, 20 circular washers, 20 OT spacers, and a user manual. 📦